Replacing the outer foil and the inner blade
We recommend replacing the outer foil [F5] every
year and the inner blade [F9] every two years.
Remove the outer foil of the shaver head [F] only
when replacing it.
Replacing the outer foil
1. While pushing the outer foil gently with the
fingers, use a fingernail to release the plastic
panel ( ) on the blade from the hooks ( ) on the
inside of the frame.
2. The new outer foil should be slightly bent and
pushed in until it is hooked in the frame.
Replacing the inner blade
1. Remove the inner blade by
holding it at both ends and pulling
straight away from the shaver.
2. Insert the inner blade by holding it
at both ends and press downward.
22
ES-EL9A USA v7.indb 22
Replacing the file
ES-EL9A
The file lifetime is approximately 1 year (assuming a
single use every 2 weeks with approximately 10
minutes per use). We recommend replacing the file
about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the
and press down.
Replacing the sonic scrub brush
ES-EL9A
Sonic scrub brush
once a year (assuming 3 minutes
(Scrub brush)
use per week)
• See "Removing and attaching the sonic scrub brush"
(page 15) for details regarding replacement of the
brush.
mark side
2019/1/15 下午6:18