Installing The Dedicated Software; Installing The Windows Dedicated Software - Tascam 102i Serie Manual Del Usuario

f USB port
Use the included USB cable to connect the unit to a computer.
(Supports USB 2.0.)
ATTENTION
i When connected to a port that supports USB 3.0 or later, it will
function in High Speed mode equivalent to USB 2.0 (480Mbps
maximum).
i After waking a computer from suspend (sleep) mode, if the unit
does not operate properly, turn it off and turn it on again or dis-
connect and reconnect the USB cable.
g DC IN 12V connector
Connect the included AC adapter (PS-P1220E) here.

Installing the dedicated software

To use this unit, a dedicated software must be installed on a com-
puter. The dedicated software might be updated at any time.
Download the latest software for the operating system you are
using from the TEAC Global Site (http://teac-global.com/).
0 When you install the dedicated software on a Windows com-
puter, the Windows driver and the Settings Panel application
will be installed.
0 When you install the dedicated software on a Mac, only the
Mac Settings Panel application will be installed.
The standard OS driver will be used.
0 With an iOS device, the standard OS driver will be used, so
there is no need to install any.
ATTENTION
Before starting to install software, quit other applications.
Installing the Windows dedicated soft-
ware
ATTENTION
i Complete installation of the Windows dedicated software on
the computer before connecting the unit to it with the USB ca-
ble.
i If you connected the unit to the computer using the USB ca-
ble before installing the Windows dedicated software and the
"Found New Hardware Wizard" launched, close the Wizard and
disconnect the USB cable.
Windows dedicated software installation
procedures
1.
Download the latest Windows dedicated software for the
operating system you are using from the TEAC Global Site
(http://teac-global.com/) and save it on the computer to be
used with the unit.
2.
Open the saved Windows software (zip file) on, for example,
the computer desktop.
3.
Double-click the "TASCAM_SERIES_102i_208i_Installer_x.xx-
.exe" (x.xx is the version number) file in the folder that appears
after uncompression to automatically launch the installation
software.
ATTENTION
If you open a zip file without decompressing it and doubleclick
the "TASCAM_SERIES_102i_208i_Installer_x. xx.exe" file in the
folder that opens, installation will not start. Right-click the zip
file and select "Extract All", for example, to decompress it and
then try again.
4.
Depending on the computer set up, a "Security Warning" or
"User Account Control" screens might appear. If this occurs,
click the "Yes" button.
8
TASCAM SERIES 102i / SERIES 208i
5.
Read the contents of the License Agreement, and select "I ac-
cept the agreement" if you agree to the terms.
Then, click the "Next >" button.
6.
Next, click the "Install" button.
7.
When the Windows security screen appears, click the "Install"
button to start installation.
8.
The following screen appears when installation has complet-
ed.
Click the "Finish" button.
The installer will quit and the Windows Settings Panel will
launch.
NOTE
The first time you connect the unit by USB to the computer af-
ter installing the software, installation of the device driver will
be executed. Some time might be necessary before the unit
is recognized because Windows Update will be automatically
searched at this time.
If the unit is still not recognized after a while, open the software
installation screen from the notification area at the bottom right
of the computer display, and click "Skip obtaining driver soft-
ware from Windows Update" to stop the search.