Publicidad
Idiomas disponibles
Idiomas disponibles
SM Short
LF Medium
Install Door surround onto the roll cage. Insert door
surround knobs. Long Rear (LR) knob at the rear.
Long Front medium (LF) knob at the front and the
Small (SM) knob into the middle hole.
TIP: Make sure the rubber gasket at the top of
the windshield is correctly sealed against the
front surround section. See photo below for
proper fit:
Fit door surround mount plate on top of door
surrounds.
4325 HAMILTON MILL RD • BUFORD, GA 30518 • 800-241-7219 (USA AND CANADA) • FAX 800-438-3788
12
LR Long
Lift roll bar pad as shown for bracket clearance over
the roll bar.
14
TIP: Make sure the rubber is correctly wrapped
around the plastic center section before
tightening with the middle knob.
16
Fit retention strap to driver side door surround
mount plate on top of rear hole in mount plate to
hold tube when top is open. Use middle short turn
knob.
13
15
17
Publicidad
