WEBTEC VFD120-E Serie Manual Del Usuario página 4

Ordering Codes
Basic Type
Regulated Flow Capacity (Table 1)
Porting (Table 2)
Motor Drive - Electric (Table 3)
Table 1: Regulated Flow (gpm refers to US gpm)
Code
030 0* - 11 lpm (3.0 gpm)
050 0* - 19 lpm (5.0 gpm)
080 0* - 30 lpm (8.0 gpm)
120 0* - 45 lpm (12.0 gpm)
160 0* - 60 lpm (16.0 gpm)
200 0* - 76 lpm (20.0 gpm)
250 0* - 95 lpm (25.0 gpm)
300 0* - 110 lpm (30.0 gpm)
* 0 to 0.5 lpm (0 to 0.1 gpm)
Table 3: Control
Code Motor Type
E12
E24
2
Regulated Flow
12Vdc
24Vdc
Typical Code VFD120
1
Table 2: Porting
Code Port Threads Inlet Regulated
Flow and Excess Flow
J
G 1–1/16" -12UN #12 SAE ORB
A
M
Note: M22 only available in flow codes 030 to 120
1
Other threads available to special order
2
All NPTF threads are to ANSI B1.20.3 -1976 Class 1. As stated
in the standard it is recommended that "sealing is accomplished
by the means of a sealant applied to the thread". NPT fittings
may also be used to connect to NPTF ports (also with a sealant
applied to the thread)
080 J -
3/4" BSPP
3/4" NPTF
2
M22 x 1.5
E12