Materials – Troubleshooting
[This battery cannot be used]
Use a genuine Panasonic battery.
0
If this message is displayed even when a genuine Panasonic battery is used, contact
the dealer.
If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
0
[Please turn camera off and then on again]/[System Error]
Turn off and on the camera.
0
If the message is displayed even when doing this several times, contact the dealer.
[The fan is not functioning correctly.]
The fan has stopped. Turn off and on the camera. If the fan does not work after
0
turning the camera off and then on again, consult the dealer.
The temperature of the camera will rise if you continue to use the camera with the
0
fan stopped. Do not use over long periods of time.
Troubleshooting
First, try out the following procedures (l 34 to 36).
If the problem is not resolved, it may be improved by selecting
[Reset] (l 32) on the [Setup] ([Setting]) menu.
Please also refer to the "Owner's Manual <Complete Guide>", which describes
0
more detailed information.
The battery becomes flat too quickly.
When connected to Wi-Fi, the battery drains quickly.
0
Turn the camera off frequently such as by using [Power Save Mode].
34
DVQX2173 (ENG)