NOTES FOR REMOVING FAULTS
Fault
The fan does not
start
The fan is noisy
The fan vibrates
too much
Important:
Opening up and repairing the appliance may only be carried out by a qualified electrician!
CLEANING/MAINTENANCE
WARNING: Danger of electric shock! Turn off the electricity at the fuse
box or circuit breaker before cleaning or servicing the appliance.
- Never use water for cleaning your ceiling fan. The appliance must not get wet.
- Do not use petrol or any similar light flammable detergents!
- Clean the surface of the housing and the blades with a dry cleaning cloth.
Regular check
- Check once a year all the screws, especially those of the ceiling suspension, for tight-
ness, retighten if necessary.
- Check electrical connections for proper connection.
54
Remedy
- Check the fuses/trips at the main box and other connections.
- Check the fan connection to the mains.
- Repeat coding of the fan with the handheld transmitter. To do this,
turn off the power supply to the fan for at least 20 seconds.
- Replace the battery in the handheld transmitter if necessary.
- Check that all screws have been tightened.
- Run in the fan and the bearings for 24 hours. Most noises disap-
pear after this time.
- All screws during assembly of the ventilator, especially those relating
to the downrod, have an important function. Not tightened screws
are the main cause of imbalances.
Please make sure that all screws are tightened.
- Check that the hanger bracket is firmly anchored to the ceiling.