Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION PROCEDURE / STEP 19
Adjust the door panel. Using adjustment cams, use a hex key or install rod to straighten the door
19
panel tightly against the shower wall.
Fasten the stopper and rollers. Adjust the stoppers so the glass door panel does not contact the
shower wall.
Note: Use hex key 2.5mm to tighten the roller.
RIGHT HAND ASSEMBLY
LEFT HAND ASSEMBLY
Seal the door assembly.
Apply silicone between the bottom of the fixed panel and the base. Silicone application along the
wall channel is also suggested. In both cases, it is done from the outside of the shower area.
Keep the entire area dry for a minimum of 24 hours.
- 13 -
Publicidad
Tabla de contenido
