Emptying The Waste Container - Lervia KH 4405 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Inserting credit cards:
• Open the safety flap over the cutter opening for
e
CD/Credit cards
• Insert the credit card from above into the middle
of the CD/Credit card cutter opening
can only shred one credit card at a time. ALWAYS
insert them into the CD/Credit card cutter opening
e
with the broad side leading. If you do not,
the magnetic strip will not be destroyed.
Note: Always insert the credit card into the
middle of the cutter opening
the shredding process will not start!
Inserting a CD:
• Insert the CD from above into the middle of the
CD/Credit card cutter opening
shred one CD at a time.
Warning!: NEVER place a finger into the cen-
tral hole of a CD when you are feeding it into
the appliance.
Clearing a material blockage:
• Press and hold the switch
the item to be shredded become jammed.
The appliance now goes into reverse and the
material to be shredded is returned.
w
• Place the switch
soon as the jammed item is returned.
Switching the appliance off:
• To switch the appliance off, move the switch
into the middle position
.
e
. You
e
. If you do not,
e
. You can only
w
in position
should
into position
(OFF) as
(OFF).

Emptying the waste container

• Empty the waste container
• Dispose of the waste material in an environmen-
tally responsible manner.
Emptying the large waste container
(Paper)
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the
appliance.
• Remove the cutter attachment
waste container
• Remove the small waste container
of the large waste container
not fall out.
• Empty the large waste container
everything back together again.
Emptying the small waste container (Plastic)
• Remove the small waste container
front of the large waste container
• Replace it after emptying it.
Notice regarding overheating of the
appliance:
If it overheats, the appliance switches itself off
automatically.
w
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• Empty the waste containers
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position
- 16 -
t
u
/
regularly.
q
from the large
t
.
u
at the front
t
, so that it does
t
and then put
u
from the
t
to empty it.
t
u
/
.
.
w

Publicidad

Tabla de contenido
loading

Tabla de contenido