Before First Use; Intended Use - Batavia BT-CMT003 Manual Del Usuario

English
q. DO NOT exert additional pressure on
the body of the tool: allow the blade or
accessory to do the work. By not exert-
ing additional pressure you maintain a
safer stronger grip on the power tool
when it breaks through the material, as
well as reducing wear on the power tool
which will extend the power tool's ser-
vice life. Additional pressure may also
bend or twist the accessory or blade
which may cause it to break and cause
injury. If the power tool allows for being
held with one or two hands hold with
two hands whenever possible. ALWAYS
exercise caution when handling this
power tool.
r. Sawing, cutting and abrasive actions
create heat. This may affect the work-
piece and power tool. ALWAYS monitor
the heat level and in the event of exces-
sive heat switch off the power tool and
allow to cool before restarting work.
Some power tools depending on design
may be more quickly and effectively
cooled by running at high speed without
load.
s. The power tool will draw in dust
through the vents on its body. Exces-
sive accumulation of powdered metal
may cause an electrical hazard and
destroy the tool. ALWAYS ensure the
environment dust level is safe for the
tool and ensure the vents are not
blocked.
t. DO NOT reach under the workpiece,
rest the workpiece on your body, or
hold the workpiece while working on
it, as contact with the blade or acces-
sory protruding from the workpiece
can result in serious injury.
u. Anti-vibration gloves should be worn
when operating power tools that pro-
duce large amount of vibration, espe-
cially during long-term use.
v. For power tools with a rotating mecha-
nism and accessories ensure the
operator is not wearing clothes or
gloves with frayed threads, cords etc.
that could be entangled in the rotating
mechanism dragging the operator's
hand into the rotating accessory caus-
6
ing injury. ALWAYS wear tight-fitting
work clothes, safety shoes. Remove
jewellery and secure long hair. NEVER
wear fabric-based gloves that can pro-
duce strands of material when operat-
ing this type of power tool.
w. DO NOT allow sanding sheets to wear
away on the sanding pad. This will
damage the surface of the pad requir-
ing replacement and may cause parts
of the sanding sheet to fly off the pad,
causing operator injury.
x. DO NOT touch the moving sanding
sheet.
y. Wire brush bristles are thrown by the
brush even during ordinary operation.
DO NOT overstress the wires by apply-
ing excessive load to the brush. The
wire bristles can easily penetrate light
clothing and skin.
Note: The tool must ONLY be used for its
intended purpose. Any use other than those
mentioned in this manual will be considered
a case of misuse. The operator, and not the
manufacturer, shall be liable for any dam-
age or injury resulting from such cases of
misuse. The manufacturer shall not be
liable for any modifications made to the
tool, nor for any damage resulting from
such modifications.

3. Before first use

Remove the machine and the accessories
from the packaging. Check the machine for
transport damage and do not use the
machine in case of damages. Keep the
packing materials away from children, risk
of suffocation!

4. Intended Use

Battery-powered oscillating multi-function
tool with quick accessory-change mecha-
nism, designed for cutting and abrasive
tasks by fast oscillation of a blade, file or
sanding pad.