General Information - SATA BVD Instrucciones De Servicio

Operating Instructions
Content [Original Version: German]
1. General information ................ 27
2. Safety Instructions .................. 28
3. Use ......................................... 29
4. Description ............................. 29
5. Scope of Delivery ................... 30
6. Technical Design .................... 30
7. Technical Data ........................ 30
8. First use .................................. 31
Read these operating instructions thoroughly and carefully before use.
Comply with the safety instructions and danger warnings!
Always make sure that these operating instructions are kept with the
product or keep them easily accessible for everyone at any time!
1.

General information

1.1. Introduction
These operating instructions contain important information for operating
the pressurized cup SATA BVD, referred to hereinafter as pressurized
cup. They also describe use, care, maintenance, cleaning and trouble-
shooting.
1.2. Target group
These operating instructions are intended for trained staff involved in
paint spraying.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions.
1.4. Replacement, accessory and wear-and-tear parts
In principle, only original replacement, accessory and wear-and-tear parts
from SATA are to be used. Accessories that were not delivered by SATA
are not tested and not approved. SATA assumes no liability whatsoever
for damages incurred due to the use of unapproved replacement, acces-
sory and wear-and-tear parts.
SATA BVD
Read first!
9. Normal operation .................... 31
10. Maintenance and repairs ........ 33
11. Care and storage .................... 34
12. Malfunctions ........................... 35
13. After Sale Service ................... 36
14. Spare parts ............................. 36
15. EC Declaration of
Conformity .............................. 37
EN
27