Electrical Connection - Sauber 1-3400 Serie Manual De Usuario

• Install the hob away from heat sources such as ovens or direct
sunlight.
• To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
• A steam cleaner must not be used.
ELECTRICAL CONNECTION
Attention!
• The hob must be installed by a qualified electrician in line with all
local standards and regulations for electrical wiring.
• Before any work on the electrical section of the appliance, it must
be disconnected from the mains.
• Connection to a good earth wiring system is absolutely essential.
• After the hob is installed, the power switch must always be in an
accessible position.
The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow = Earth Blue & Grey = Neutral
Brown & Black= Live
As the colours of the wires in the mains lead for the appliance may
not correspond with the coloured markings identifying the terminals
in your spur box, proceed as follows:
1) The wire which is coloured green and yellow must be
connected to the terminal marked with the letter E (Earth) or
with the earth symbol
2) The wire which is coloured blue or grey must be connected to
the terminal marked N (Neutral), or coloured Grey.
3) The wire which is coloured brown or black must be connected
to the terminal marked L (Live), or coloured Black or Brown.
or coloured green and yellow.
32