To make coffee with pods, use the provided pod lter (F) (Fig.
Place the pod in the lter ring (Fig. 3).
Insert the pod into the lter. The pod must be well centred and placed inside the lter.
3 To prevent water leakage, fold and place inside the lter the e ternal paper parts of the pod which might
stick out from the lter holder (Fig.
Insert the lter holder into its seat (K) (Fig.
Warning!
Tighten the lter holder well and make sure it is properly screwed to the ange so as to avoid splashing
water or coffee.
Select the "Espresso Pod" beverage and follow the instructions given on the display.
NOTE
.
After making coffee, the pod might get stuck in the lter holder seat while removing the lter holder. To remove
it, slightly tilt the lter holder so as to let the pod fall into it.
Warning!
Danger of burns. Do not touch the metal parts of the appliance.
To always make an e cellent coffee, buy pods presenting the E.S.E. compatibility mark.
I
o speci c operation needs to be carried out to start distributing coffee after distributing steam. The appli-
ance is provided with an electronic system which makes it possible to always distribute coffee at the optimal
temperature.
HOW TO MAKE TEA
From the home page, select the "Tea" page. A screen from which you can select the type of tea you want
to make will appear on the display.
From the tea beverages screen, you can select the following types of beverage: White Tea, Green Tea, Oolong
Tea, Black Tea.
Select the type of tea you want to make. A screen from which you can select the size of the beverage will
appear on the display.
- Press the Con guration button (
ou can select "Short", "Medium", "Long", and "E tra Long".
- Press the (
) or (
).
).
E
P
.
) from the "Size" page to set the desired tea size.
) buttons to scroll among the available options.
):
37