Optional Accessories - Fein RSG Ex 1500 A Manual De Instrucciones

en
22

Optional accessories

Order number Quantity
3 02 31 013 02 7 1
4 26 34 020 00 5 1
3 02 17 216 00 4 1
4 30 12 051 12 2 1
6 33 05 013 00 2
9 12 01 002 00 4
3 24 33 027 01 7 1
9 26 01 023 02 3 1
3 14 14 055 00 2 1
4 11 36 005 01 9 1
3 02 31 035 02 0 1
3 02 16 166 01 0 1
3 40 56 026 00 0 1
Compressed-air cooling lubricant supply unit 9 12 01 002 00 4
Due to the possible high cutting and feed rates of the pipe milling machine, cooling
and lubrication of the toolsis required when machining steel. The compressed-air
cooling lubricant supply unit operates on the principle of atomisation and evapora-
tion of the cooling lubricant and provides continuous good cooling and lubrication
through the spray nozzles mounted on the pipe milling machine.
Additionally, the contamination of soil at the jobsite through otherwise manually
applied drilling emulsion, is avoided.
We recommend using BIOCUT 3000 metalworking lubricant as the cooling lubri-
cant. It is a new fully synthetic high-performance lubricant with excellent adhesive
and cooling effect, is water-soluble, readily biodegradable and economical in con-
sumption (depending on the setting up to approx. 0.3 dm
BIOCUT 3000 is free of substances that are hazardous to health. It meets the
requirements of the German Gas and Water Association. (DVGW).
All ingredients comply with the guidelines of the FDA (Food and Drug Administra-
tion) and the German Pharmacopoeia (DAB) in the currently valid version.
The lubricating agent is available from:
Lubricating agent BIOCUT 3000 for temperatures to 0°C:
1 L - 3 21 32 039 00 0
5 L - 3 21 32 040 00 0
Cold-resistant lubricating agent for temperatures to -25°C:
1 L - 3 21 32 042 00 0
5 L - 3 21 32 043 00 0
For the three-phase versions RSG Ex (**), a compressor (FEIN order number
9 26 01 023 02 3) with an intake volume of approx. 130 l/min is required in order
to be able to use the compressed-air cooling lubricant supply unit.
Spare parts.
The spare parts list can be found on the Internet under www.fein.com.
Designation
Chain with 10 chain pieces
Securing ring
Pin
Fitting screw
Spark-free drift
Compressed-air cooling lubricant supply
unit (CCLU)
Connection parts for CCLU (board)
Compressor for CCLU
PA-DL hose, complete, for compressor
Coupling sleeve
Chain
Pin
Insertion discs
3
/h per nozzle).
Declaration of conformity.
The CE Declaration applies only for European Union and EFTA (European Free
Trade Association) countries, and only for products intended for the EU or EFTA
market.
FEIN declares itself solely responsible for this product conforming with the rele-
vant provisions given on the last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out power tools and accessories should be sorted for environ-
mental-friendly recycling.