Resolución De Incidencias; Technical Specifications - FONESTAR TSI-40-512 Manual Del Usuario

EN
RESOLUCIÓN DE INCIDENCIAS
PROBLEM SOLUTION
No sound Check the power supply of the transmitter and the receiver.
Check that the transmitter and the receiver are tuned to the same frequency/ channel.
Check if the transmitter is far away from from the receiver.
Check if the receiver is positioned near to metal objects or if there are obstacles between the
receiver and the transmitter.
Interference When using 2 or more transmitters at once, check that the channels selected do not interfere
with one another.
Check if the interference comes from another wireless microphone system, TV,
Distortion Check if the receiver volume is either too low or too high.
Check if the interference comes from another wireless microphone system, TV, radio, etc.

TECHNICAL SPECIFICATIONS

DESCRIPTION
INPUTS
OUTPUTS
CONTROLS
POWER SUPPLY
DIMENSIONS
ACCESSORIES
SIMPLIFIED EU DECLARATION OF CONFORMITY
FONESTAR SISTEMAS S.A. hereby declares that
The complete text of the EU Declaration of Conformity is available at the following internet address:
fonestar.com/ES/TSI-40-512
TSI-40-512
UHF transmitter for desktop or for installation in 1 U 19" rack.
32 selectable channels PLL UHF 512-525 MHz.
Transmission with mono FM modulation.
For use with the FONESTAR wireless in-ear monitor system.
2 mics/lines L and R, 6.3 mm jack
1 aux, 3.5 mm stereo jack
Stereo headphone, 3.5 mm jack
On/off
Volume controls: L and R channel and headphone output
RF Channel Selection and Setup Buttons
RF output level control
12.8 V DC, 1 A with adapter included
210 x 46 x 215 mm depth
Antenna
2 x 1 m cables with 6.3 mm mono jack connectors
1 x 1 m cable with 3.5 mm stereo jack plugs
Mounting brackets for assembly in 1 U 19" rack
the UHF transmitter complies with the Directive 2014/53/EU.
- 4 -
radio, etc