Mounting Your Navigator Iv In An - BMW Motorrad Navigator IV Manual Del Usuario

Getting Started
Mounting Your Navigator IV
E
in an Automobile
N
1. Plug the automotive power cable into the
power connector on the right side of the
cradle.
Release button
Cradle
2. Place the friction mount on the
dashboard.
3. Slide the mount arm with cradle attached
into the friction mount.
Mount arm
Friction mount
Mounting base

4. Slide the locking lever into the locked
position.
5. Snap the cradle onto the friction mount
pivot arm.
Automotive
power cable
6. Fit the bottom of your Navigator IV into
the cradle.
7. Tilt the Navigator IV back until it snaps
into place.
8. Plug the other end of the automotive
power cable into a power outlet in your
car.
9. If you are using a traffic receiver in
Europe, secure the antenna on the traffic
receiver to the windshield using the
suction cups.
noTe: The automotive mount is included
with the optional car kit.
BMW Motorrad Navigator IV Owner's Manual