Environmental Protection - BGS technic 9326 Manual De Instrucciones

SAFETY INFORMATIONS
•
Do not use setting tools as a counter-holder for camshaft and crankshaft, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
USE
The flywheel locking tools (1 or 2) are fitted to the starter mounting points in the clutch bell housing
and prevent the flywheel from turning when loosening and tightening the crankshaft sprocket.
The camshaft locking pins (3) are suitable for single, double and quad camshafts.
On engines with quad camshafts and larger displacement, the locking pins are inserted through
corresponding holes on the back of the valve cover into the holes in the camshaft sprockets.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed