Electrical Equipment - Berner BWDVC Manual De Montaje

Bed.-Anl. IS-Sauger BERNER.QXD
3. Only use original accessories
Paper filter bag FB 25
for 25-l container;
1 set of 5
Filter cassettes FKP 4300
Polyester material
1 set of 2
For other optional accessories see our
Accessories List or ask for the corresponding
information.
4. Fields of application
For wet and dry vacuum cleaning. Not suitable
for vacuuming health hazardous dusts. The
vacuum cleaner with socket and ON/OFF auto-
matic switching system is intended for the
connection of electric tools.
5. Setting into operation
When unpacking, check that the appliance is
complete and that there is no transport
damage.

5.1 Electrical equipment

The appliance is switched ON/OFF with the
switch 2a (see fig. 1 on the top section 1 of
the appliance), or switch to automatic or
vibration mode.
O = Suction >OFF<
I = Suction >ON< (manual operation)
A = Ready for ON/OFF automatic switching
system (the vacuum cleaner is switched
on and off by the connected electric tool).
R = Filter cleaning function; in this setting the
vibrator will operate for 7 seconds after
which it will be automatically turned off.
AR =Appliance version featuring "AR" can be
operated as described under "A" except
that automatic filter cleaning (as describ-
ed under "R") is turned on when the
volume flow display lights up.
The power socket 2b is intended for the
connection of an electric tool.
14
26.10.2005 14:05 Uhr
WARNING! An electric tool must be switched
off when it is connected. The socket is always
live when the plug is inserted in a mains socket,
irrespective of the switch position. In the "0"
Art. 15 85 10
switch setting, the socket can be used for an
extension line (e.g. for a light).
Connected load: Suction unit and appliance
Art. 15 85 07
max. 16 A.
On appliances featuring two power sockets,
the socket for automatic switching is identified
by an "A".
Appliances with an electronic suction force
control feature a rotary knob 2d with which the
suction force can be adapted to the object that
is being cleaned.
The vibrating device should be activated
(switch position R) at the latest when the
volume flow display 2c (warning light) lights
up or when the suction power decreases.
The suction openings of electric tools are
not standard. Consequently, an adapter (rubber
nozzle) 76 15 91 is available that can be
shortened to fit the given electric tool. With
electric tools that have a very small suction
opening the volume flow display 2c may
remain permanently illuminated during operati-
on because the volume flow is small. However,
bypass motor cooling ensures that no problems
can arise when operating continuously under
these conditions. Such appliances should be
operated in the "A" switch setting and not
"AR".
6. Vacuum cleaning
The suction force of appliances with a handle
tube can be matched to the object being
cleaned with the secondary air slide.
Seite 14