English - IKEA BETTORP Serie Manual De Instrucciones

English

Features
Wirelessly rechargeable lamp.
• Certified according to specification Qi 1.2.4 BPP.
• 3 levels of dimming: 150lm/60lm/18lm.
• LED status indicator.
Instructions for use
This lamp can be recharged by a wireless charger.
After being fully charged, it can be turned on for up
to 6 hours.
• Before using the lamp for the first time, remove
the outer base cover and remove the battery box
lid.
• Insert 4 x 1.2V AA/HR6 NiMH batteries (not
included) with correct polarity.
• Close the lid and put back the outer cover on the
lamp base.
• Attach the shade at the top.
• The lamp is now ready for use.
Charging
• ChargingFor wireless charging, place the device
to be charged on top of the plus sign (+) on the
charger. The device must be placed directly over
the plus sign (+) on the charger for the charging
function to work optimally.
• If your battery is completely discharged, it may
take a few minutes before it starts charging. This
is entirely normal.
• The LED charging indicator on the lamp will
alternate between flashing red and green in case
of wrong battery types or incorrect polarity.
LED charging indicator:
Charging: constant LED red light.
Charging completed: constant LED green
light.
Error: LED flashes red and green.
Good to know
• Devices may get warm during charging. This is
completely normal, and they will gradually cool
down again after they are fully charged.
• Charging time may vary based on the device's
battery capacity, charge level, the age of the
battery and the temperature in the surrounding
area.
• Storage temperature: -20°C to 25°C.
• Operating temperature: 0°C to 40°C.
Care instructions
To clean the product, wipe with a soft cloth
moistened with a little mild detergent. Use another
soft dry cloth to wipe it dry.
Note!
Never use abrasive cleaners or chemical solvents
since this can damage the product.
Save these instructions for future use.
WARNING:
• Only use the product in dry locations.
• Children should be supervised to ensure they do
not play with the product.
• Do not subject the product to wet, moist or
excessively dusty environments since this can
cause damage to the unit.
• If the product is damaged, it should be disposed
of.
• Only to be used with Qi-certified chargers.
Product servicing
Do not attempt to repair this product yourself.
If you open or remove parts, you may expose
yourself to dangerous voltage points or other risks.
Recommended battery types:
4 x IKEA LADDA 2450 (AA/HR6, 1.2V, 2450mAh, Ni-
MH) (not included).
Use only Ni-MH type batteries.
Do not use Alkaline, Carbon Zink or other similar
battery types.
Do not mix batteries of different capacities, types
or date stamps.
Remove the batteries if the product is to be stored
for a long time or before it is scrapped.
Technical data
Type: E2022 BETTORP
Input: 5.0V DC/4 x 1.2V AA/HR6 Ni-MH
Estimated charging time: 4-5 h
Estimated battery time: 6 h at 100% brightness
Brightness: 150lm/60lm/18lm
Indoor use only
Manufacturer: IKEA of Sweden AB
(commercial registration number: 556074-7551)
Address: Box 702, SE-343 81 Älmhult, SWEDEN
4