Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS
WARM
1. Press the WARM button to engage the warm function
and keep your food warm after cooking until you're ready
to serve.
2. The LED display will show 145F, temp and warm.
3. Use the [↑] and [↓] buttons above and below the
temperature icon to adjust the warm temperature.
4. Press the [↑] and [↓] buttons above and below the time
icon to adjust the warm time. The LED display will show
01:00 (default), time and warm.
5. Use the [↑] and [↓] buttons above and below the time
icon to adjust the warm time.
6. Press the START/PAUSE button to start cooking. The
unit will go through the regular stage cooking cycle then
will go into warm at the temperature set as well as the
set time.
Using Warm as an Independent Function
1. Warm can be used as an independent function. Press
and hold the WARM button for two (2) seconds.
2. The unit will automatically begin the warming function
and the LED display will show 01:00, time and warm.
3. Warm temperature and time can be adjusted at this time
by using the [↑] and [↓] buttons.
4. When the warming time runs out, the LED display will
show End and will beep three (3) times.
Notes:
•
Warm temperature can only be adjusted up to 200F.
•
Warm can be used with the program options as well.
Simply choose the program number and press the
WARM button and adjust warm temperature and time.
•
To cancel the warm function at any time simply press
the WARM button. Warm will no longer be lit in the
LED display.
22
22
instructions
PROGRAM
The PROGRAM button represents Memory Entry
(the storage of frequently used cooking sequences)
and Memory Recall (retrieval of cooking sequences).
Program slots number 1~100 are designated for preset
programs. Slots 101~200 are for your own unique
programs. The unit comes with 100 pre-programed
cooking recipes along with an additional 100 memory
slots to add your own unique recipes the way you like
them cooked.
Memory Recall
Press the PROGRAM button. The LED display will show
prog and 1.
1. Use the [↑] and [↓] buttons to choose the desired
program number to recall. Either set of [↑] and [↓]
buttons (temperature icon or time icon) can be used to
scroll through the program numbers.
2. Once the program number is chosen, press the
START/PAUSE button to begin cooking. You can make
temperature and time adjustments if desired.
3. The unit will cook at the programmed settings.
Program Your Own Recipe Before Cooking
1. Set your cooking parameters using DELAY, PREHEAT,
SEAR 1, STAGE (1~5), SEAR 2 and/or WARM.
2. Press the PROGRAM button. The LED display will show
prog and 101.
3. Use the [↑] and [↓] buttons to choose the desired
program number to save the program to (101~200).
4. Press the PROGRAM button again to store and save the
program to your chosen program number. The program
is now stored and available for future recall.
5. Press the START/PAUSE button to begin cooking
the program.
Program Your Own Recipe During Cooking
1. Set your cooking parameters using DELAY, PREHEAT,
SEAR 1, STAGE (1~5), SEAR 2 and/or WARM.
2. Press the START/PAUSE button to begin cooking.
3. During cooking, press the PROGRAM button. The LED
display will show prog and 101.
23
23
nuwavenow.com
nuwavenow.com
Publicidad
