Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS
Function Buttons
ON/OFF: The ON/OFF button turns the unit on and off and
stops all cooking functions.
START/PAUSE: When the START/PAUSE button is pressed,
the unit begins or pauses cooking. The START/PAUSE
button is also used to mute and unmute the Brio's beeping
sounds for a quiet operation if desired.
[↑] & [↓] Buttons: Use the arrow buttons to adjust
temperatures and times.
WATTS: The unit comes with three (3) wattage adjustments
(900, 1500 & 1800). Press the WATTS button to change the
running wattage the unit will use. When the unit is turned off
and/or unplugged, the unit will run at the wattage previously
used when plugged in and turned on.
DELAY: Use the DELAY button to delay cooking for up to
24-hours. Use the [↑] and [↓] buttons to adjust the delay time.
To cancel delay at any time, simply press the DELAY button.
STAGE: Use the STAGE button set to up to five (5) different
cooking parameters. Cooking temperatures and times can
be adjusted for each stage of cooking using the TEMP &
TIME buttons and the [↑] and [↓] buttons.
PREHEAT: Use the PREHEAT button to preheat the unit
before cooking. Use the [↑] and [↓] buttons to adjust the
temperature before or during preheat. To cancel the preheat
function press the PREHEAT button anytime.
SEAR: The SEAR button is used to cook at high temperature
for a short amount of time. Use the SEAR button to "sear"
foods directly before and/or after the regular cooking cycle.
Use the [↑] and [↓] buttons to adjust the temperature and
time (up to 5-minutes) before or during the searing cycle.
WARM: Use the WARM button to keep your food warm after
cooking or when you simply want to keep something warm
for an extended amount of time. Use the [↑] and [↓] buttons
to adjust the warming temperature and warming time. Press
the WARM button to cancel the warm cycle.
PROGRAM: The unit comes with 100 pre-programed
cooking recipes along with an additional 100 memory slots to
add your own unique recipes the way you like them cooked.
Use the PROGRAM button to recall and save
programmed recipes.
14
14
instructions
PROBE: Use the PROBE button to set the Digital
Temperature Probe's target temperature as-well-as to view
the foods internal temperature during cooking. Use the [↑]
and [↓] buttons to adjust the Digital Temperature Probe
target temperature.
Order of Cooking Sequence:
1. Delay
2. Preheat
3. Sear 1
4. Stage 1~5 / Program / Probe
5. Sear 2
6. Warm
FUNCTION USES
Plug the power cord into an electrical outlet. Press the ON/
OFF button to turn the unit on. The LED display will show
360F and TEMP.
ON/OFF
1. Press the ON/OFF button to turn the unit on and off.
Once turned on the LED display will show the default
cooking temperature (360F) and the word temp.
2. The temperature can be adjusted up or down by
using the [↑] and [↓] buttons above and below the
temperature icon.
3. The default cooking time is 15-minutes. To adjust the
cooking time, press the [↑] and [↓] buttons above and
below the time icon.
4. Press the START/PAUSE button to begin cooking.
Note: Before setting any other cooking function, set the
regular stage 1 cooking temperature and time. Stage
cooking is explained in the STAGE section of these
Operating Instructions.
START/PAUSE
1. Press the START/PAUSE button to begin cooking. The
":" will flash indicating the unit is now cooking.
2. To pause cooking, press the START/PAUSE button or
simply remove the Fry Pan Basket with Base Tray. The
":" will no longer flash indicating the unit is now paused
and the LED display will show open.
15
15
nuwavenow.com
nuwavenow.com
Publicidad
