aarke CARBONATOR 3 Guia Del Usuario página 7

EN
User Guide
THE CARBONATION PROCESS
1. Fill the bottle
Rinse the bottle with lukewarm water before
first time use. Fill with cold, clean water
up to the marked filling line. If the bottle is
overfilled, excess water will flow into the spill
tray during carbonation.
3. Carbonate the water
Push and gently hold the lever down until
you hear a persistant buzzing noise from the
valve. Carbonation levels can be increased
by repeating the process up to 3 times.
Pro tip: Conserve gas and maximize bubbles by only releasing the lever half-way between each carbonation cycle (each
time you push the lever down all the way).
2. Attach the bottle
Place the bottle in the socket and begin to
screw in with a counterclockwise motion.
No need to overly-tighten, but be sure the
bottle isn't crooked when screwed in.
4. Release the lever
Release the lever back to its resting position.
The remaining pressure in the bottle will
automatically release with a pu sound.
Unscrew and remove the bottle from the
Aarke Carbonator.
4
EN