Set Date And Time - Rothenberger ROWELD P250-630B Premium CNC SA Instrucciones De Uso

Parameter Description
name
P001 Remaining energy saver time
P002* Power saving function active
P003 Heating plate temperature offset
P004 Pmax for cutting
P005 Target pressure
P006 Target temperature
P007 Timer T1 target value
P008 Timer T4 target value
P009 Pstart for cutting
P101 Deviation for repumping
P102 Lifting time after cutting
P103 Set temperature (min)
P104 Set temperature (max)
P105 Button lock (yes/no)
P106 Lifting pressure
P107 Full runtime until buzzer goes on
P100 Change code
* P002 - Power saving function:
0 - none,
1 - when the miller is running the heating element will be switched off, (Factory setting)
2 - when the hydraulic motor is running the heating element will be switched off,
3 - when t4 is running the heating element will be switched off.
3.6

Set date and time

 Close the program by clicking briefly in the upper left corner.
44
default Unit
99 min
0
5 °C
20 bar
1/10bar
210 °C
45 sek
6 min
10 bar
5 %
10 1/10sek 0
160 °C
270 °C
5 sek
135
50 1/10sek 0
8001
ENGLISH
min max Rights
0 99 Welder
0 3 Welder
-25 25 Welder
10 50 Welder
Welder
P103 P104 Welder
1 1500 Welder
1 99 Welder
0 P004 Welder
1 50 Master
100 Master
0 300 Master
0 300 Master
0 50 Master
10 160 Master
200 Master
Master