auna TT-186 DAB Manual De Instrucciones página 26

EN
26
Recall preset stations
1. Press the Pre / Memory button (5) once to enable recall state
2. Press Skip up / down button (7) button to select the desired memory
station.
3. Press Select button (9) to confirm the recall the memory station.
• The pre-set memories will be cancelled completely if disconnecting
the main power supply and back up battery did not installed. You are
recommended to switch the system into standby mode for convenience
usage.
• There are 3 seconds for program state, after 10 sec. This state would
resume to normal tuner mode automatically.
• You can overwrite a present station by storing another frequency in its
place.
HINTS FOR BEST RECEPTION: FM : THE RECEIVER HAS AN EXTERNAL FM
WIRE ANTENNA TO CONNECT TO THE ANTENNA SOCKET AT THE BACK
OF THE UNIT. THIS ANTENNA SHOULD BE TOTALLY UNRAVELLED AND
EXTENDED FOR BEST RECEPTION. MOVE THE ANTENNA TO OBTAIN THE
BEST RECEPTION.
Language setting
This apparatus provide 4 language for FM/DAB operation display.
1. In DAB/FM mode, Press and hold the Menu/Info button (3) to enter
the "Menu", then press Skip up / down button (7) button to select
"Language ".
2. Press Select button (9) to enter language mode setting, then press Skip
up / down button (7) button to select your desired language between
English/ German/ French/ Italian. Then press Select button (9) to confirm
the setting.
3. In any state press Menu/Info button (3) to quit the setting mode.
DAB/FM reset :
If case would like to erase all the FM/DAB programmed memory station,
operation as below.
1. Set in DAB or FM mode, Press and hold the Menu/Info button (3) to
enter the "Menu", then press Skip up / down button (7) button to select
""<Factory Reset>".
2. Press Select button (9) to enter the will show "Factory Reset ?" (No) or
Yes , then press Skip up / down button (7) button to select (Yes).Then
press Select button (9) to confirm the will show "system reset ok".
3. Apparatus will erase all the programed memory station, perform the