Panasonic AJ-UDC150AP Manual De Instrucciones página 2

AJ-UDC150AP HD/SD Format Converter Board
When installed in the video cassette recorder, the AJ-UDC150AP board serves to convert the HD and SD output formats. The menu opera-
tions performed on the VTR are enabled by installing the board.
For details on the menus, refer to the VIDEO menu in the SYSTEM menu and USER menu described in the operating instructions.
Installation
1
First, turn off the power of the VTR. Then remove
its top panel and the board clamp.
Board clamp
2
Install the format converter board into F4 in the
main unit as shown in the figure.
F4
3
Reattach the board clamp, followed by the top
panel.
CAUTION:
These servicing instructions are for use by qualified service
personnel only. To reduce the risk of electric shock do not per-
form any servicing other than that contained in the operating
instructions unless you are qualified to do so.
All manuals and user guides at all-guides.com
2
Features
1. Format conversion
Format conversion differs between the 1080/59.94i system and
the 1080/50i system.
T Format conversion when the board is installed in the 1080/59.94i
system:
HD SD conversion:1080i 480i or 480P
720P 480i or 480P
HD HD conversion:1080i 720P
SD SD conversion: 480i 480P
SD HD conversion:480i 1080i or 720P
480P 1080i or 720P
T Format conversion when the board is installed in the 1080/50i sys-
tem:
HD SD conversion:1080i 576i
SD HD conversion:576i 1080i
2. Screen size settings
The size of the output image screen can be set on the main
unit's menu screen.
Users can select any of five settings for down-conversion: FIT_V,
FIT_H, FIT_HV, 14:9 or 13:9.
Users can select any of three settings for up-conversion: FIT_V,
FIT_H or FIT_HV.
3. Frequency characteristics settings
The frequency characteristics in the horizontal and vertical direc-
tions of the output signals can be set on the main unit's menu
screen. Users can select one of two settings, namely, STD or
NARROW for up-conversion and WIDE or STD for down-conver-
sion.
4. Contour enhancement function
Contour enhancement can be provided for the edge areas in the
horizontal and vertical directions of the output signals.
enhancement level can be set on the main unit's menu screen.
Users can select one of four settings: 0, +1, +1.5 or +2 dB.
5. Variable Y/P /P level and black level
B R
The Y/P /P level and black level of the output signals can be
B R
set on the main unit's menu screen.
Specifications
Dimensions (WtHtD):
3-15/16qt9/16qt6-5/16q (100t13t160 mm)
Video input/output signals:
Format conversion when the board is installed in the 1080/59.94i
system:
HD: 1080i/720P, SD: 480i/480P
Format conversion when the board is installed in the 1080/50i
system:
HD: 1080i, SD: 576i
Frequency characteristics settings:
STD or NARROW for up-conversion
WIDE or STD for down-conversion
Enhancement level settings:
0/+1/+1.5/+2 dB
Video adjustment ranges:
s∞ to +3 dB for Y output gain
s∞ to +3 dB for P
output gain
B
s∞ to +3 dB for P
output gain
R
±10% for Y black level
The