Team kalorik TKG EBBQ 1002 L Manual De Instrucciones página 8

BEFORE FIRST USE
Assemble the barbecue as described in the "Assembly" chapter. Clean the barbecue grill
and accessories (see Cleaning and Care). It is advisable to preheat the Barbecue Grill for
at least 10 minutes at full temperature and without any food on the Grill Plate, so that any
residual odours dissipate when first using the appliance.
GETTING STARTED
• Insert the plug into the wall socket, and the two LED function lights in the thermostat
buttons (3 and 9) will illuminate Blue. This indicates that the device is receiving power,
and ready for use.
• Turn the Heat on by turning the progressive thermostat (3 and 9) clockwise. The LED
function light (3 and 9) will illuminate Red.
• The grill plate (11) has two separate heating zones. These can be switched on and
adjusted separately with the respective thermostat controller below.
• Preheat the unit for about 10 minutes at maximum power, then set the progressive
thermostat to the desired temperature level.
• During operation, the LED function lights will alternate between Red and Blue
illumination. This is totally normal as the thermostat automatically regulates throughout
the heating process. So, when the desired temperature is reached, the LED function
lights will first illuminate Blue. If they switch back to Red, the device is heating up again,
before returning to Blue once the desired temperature is reached. This is the normal
cycle of the thermostat once the desired temperature is reached.
• Open the lid (5).
• Place the food on the grill plate (11).
• The grilling times are always different depend on the type of food being cooked and
the individual weight of each item.
• Always use the handle (4) to open and close the lid.
DRIP TRAY
The drip tray (6) collects any grease emitting from foods during the grilling process.
Please make sure that the area where the Drip Tray is inserted into the Electric
barbecue housing (6) is not blocked.
TKG EBBQ 1002 L 8