Maintenance Work; Parts Subject To Wear And Tear; Main Parts; Specifications - Stihl HLE 71 Manual De Instrucciones

18 Main Parts

– Consequential damage caused by continuing
to use the product with defective components.
17.1

Maintenance Work

All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
things, this includes:
– Damage to the motor due to neglect or defi‐
cient maintenance (e.g. not cleaning cooling
air inlets).
– Damage due to incorrect electrical connection
(voltage, inadequately rated connecting
cords).
– Corrosion and other consequential damage
resulting from improper storage.
– Damage to the product resulting from the use
of poor quality replacement parts.
17.2

Parts Subject to Wear and Tear

Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:

– Cutting blades

0458-277-9821-B
18 Main Parts
1
3
2
10
1 Loop handle
2 Drive tube
3 Carrying ring (HLE 71)
4 Starting lockout
5 Switch
6 Strain relief (cord retainer)
7 Power cord
8 Angle screwdriver
9 Cutting blades
10 Blade guard (scabbard)
11 Gearbox
12 Screw plug, blade drive
13 Screw plug, angle drive
14 Quadrant
15 Adjusting lever
16 Sliding sleeve
# Serial number

19 Specifications

19.1 Motor
Rated voltage:
Rated current:
Frequency:
Power consumption:
Fuse:
Protection class:
19.2 Cutting blades
Blade type:
Sharpening angle relative to
horizontal:
English
4
#
5
8
7
15
12
11 14
13
230 - 240 V
2.6 A
50 Hz
600 W
min. 10 A
II, E
Double-sided
45°
6
16
33