Ferroli CRONO REM Manual De Usuario página 80

Frost protection function: 0 = not active - 1 = active
Note: This is not the frost protection function of the boiler card.
FRX
The boiler card frost protection function does not depend on
this setting.
KREG
Weather compensation curve slope
(1)
sP Fixed point offset for weather compensation calculation
(1) (4)
BUILD Building factor
(1) (4)
Weather compensation activation:
CL EN
(4)
0 = not active - 1 = active
KORR Ambient correction for weather compensation
(1)
Ambient temperature hysteresis for requested activation/
sDR
deactivation
Correction factor for ambient probe integrated into the
OFFTR
Remote Control
Password for accessing TSP parameters.
PsW
(4)
The password value to be set is 77.
The parameter is visible if weather compensation is enabled (see parameter CL EN in the installer menu)
(1)
Maximum flow temperature value settable in boiler (not over 85 °C)
(2)
Minimum flow temperature value settable in boiler (not under 20 °C)
(3)
These parameters are visible only in INsTaLLER mode.
(4)
80
EN
cod. 3542A970 - Rev 01 - 03/2022
0 1
0.1 5.0
20°C 40°C
0 10
0 1
0 20
0.5°C 4°C
-3°C +3°C
0 255