Ukca Declaration Of Conformity; General Power Tool Safety Warnings; Introduction; Work Area Safety - Stihl HLA 66 Manual De Instrucciones

English
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
25 UKCA Declaration of Con‐
formity
25.1 STIHL HLA 66, HLA 86 Long-
Reach Hedge Trimmers
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Category: Cordless long-reach hedge trimmer
– Manufacturer's brand: STIHL
– model: HLA 66, HLA 86
– Serial number: 4859
conforms to the relevant provisions of UK regula‐
tions The Restriction of the Use of Certain Haz‐
ardous Substances in Electrical and Electronic
Equipment Regulations 2012, Supply of Machi‐
nery (Safety) Regulations 2008, Electromagnetic
Compatibility Regulations 2016 and Noise Emis‐
sion in the Environment by Equipment for use
Outdoors Regulations 2001 and has been manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014-1, EN 55014-2, EN 62841-1,
EN 62841-4-2 and EN ISO 10517.
Applied conformity assessment procedure in
accordance with UK-Verordnung Noise Emission
in the Environment by Equipment for use Out‐
doors Regulations 2001, Schedule 8.
– Measured sound power level: 91 dB(A)
– Guaranteed sound power level: 93 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture
and machine number are shown on the long-
reach hedge trimmer.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
42

25 UKCA Declaration of Conformity

pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
26 General Power Tool Safety
Warnings
26.1

Introduction

This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under "Electrical Safety"
do not apply to STIHL cordless products.
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
26.2

Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
26.3

Electrical safety

a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (groun‐
ded) power tools.Unmodified plugs and
matching outlets will reduce risk of electric
shock.
0458-185-9821-B