VALBERG WF 712 D W701T Instrucciones De Uso página 31

C
1
Use the washing powder scoop (*) supplied with the machine or the measuring plate for
washing liquid to open the pump access hatch.
2
Insert the end of the washing powder scoop or the graduated ruler for washing liquid
into the opening of the access hatch. Then press gently backwards. The access hatch opens.
• Before opening the filter access hatch, place a container underneath to collect the residual
water in the machine.
• Loosen the filter by turning it anticlockwise. Then pull it out to remove it. Wait for the
water to flow out.
NOTE
Depending on the amount of water inside the machine,
the collection container may need to be emptied
several times.
3
Remove any foreign object that may be present in the filter using a soft brush.
4
After cleaning, re-assemble the filter by inserting it and turning it clockwise.
5
When closing the pump access hatch, make sure that the fittings inside the hatch are
aligned with the holes on the front of the machine.
5
Close the filter access hatch.
CAUTION
The pump may be hot; wait until it has cooled down
before carrying out any maintenance or cleaning
operations.
Useful information
28 EN