Troubleshooting - VALBERG WF 712 D W701T Instrucciones De Uso

C
Body/Drum
1
Body
Use a non-abrasive cleaning agent or soapy water to clean the outer shell of the machine.
Dry with a soft cloth.
2
Drum
Do not leave metallic objects such as needles, paper clips, coins, etc. in the machine. These
objects cause rust to form in the drum. To clean such rust spots, use a non-chlorine cleaning
agent and follow the manufacturer's instructions for the product being used. Never use rock
wool or other similar hard materials to remove rust stains.

Troubleshooting

Any repairs to the machine must be carried out by an authorised maintenance service. If
your machine needs a repair and you are unable to resolve the issue with the information
provided below, then you should:
• Unplug the machine from the mains supply.
• Close the water supply.
Fault
The machine does not start.
Useful information
1
Possible cause
The machine is not plugged
The fuses are defective.
No mains power supply.
The Start/Pause button has
not been activated.
Program selector in the
"Stop" position.
The machine door is not
completely closed.
31
2
in.
Check the mains supply.
Set the program selector to
Close the machine door.
EN
Troubleshooting
Plug in the machine.
Replace the fuses.
Press the Start/Pause
button.
the desired cycle.