Publicidad
Idiomas disponibles
Idiomas disponibles
Valve Nut
Sealing Ring
Washer
Nut
4. Install the Tank
Position the sealing ring on the valve nut.
Thread the supplied supply hose onto the water inlet on the
bottom of the tank.
Position the tank on the bowl, aligning the carriage bolts with the
corresponding holes in the bowl and running the supply hose
through the corresponding hole.
Thread the two supplied bolts into the bowl through the bolt
holes in the bottom of the tank.
Slide a metal washer and rubber washer onto the bolts.
CAUTION: Risk of product damage. Overtightening may
cause breakage or chipping of the vitreous china.
Tighten the bolts using a screwdriver. Do not overtighten.
Turn the water on (There is a shut-off valve in the toilet tank that
should already be in the closed position. Turn it off if the tank
begins to fill) and check for leaks.
Kohler Co.
Metal Washer
Supply Hose
Rubber Washer
9
1095641-2-B
Publicidad
