Descargar Imprimir esta página

Setting Up The Device; Keeping This Device Away From Water; Ventilation Warning; Cleaning The Device - essentiel b RRV-300DAB+ Instrucciones De Uso

Ocultar thumbs Ver también para RRV-300DAB+:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Setting up the device

Set up the device on a flat, stable surface.
Do not set up this device near heat sources, such as radiators, hot air vents, stoves,
or other appliances (including amplifiers) that produce heat.
Do not place open flame sources (such as a lit candle) on or near the device.
Do not place the device in a place subject to vibration.
Always connect your device to an easily accessible electrical outlet.
Use this device in a cool place. This device should not be used in a hot environment.
Never unplug the device by pulling the power cord, but by grasping the adapter unit.
If your device starts to function in an unusual manner, and particularly if it emits
sounds or odours that you feel are not nonmal, you should unplug it immediately and
have it examined by a qualified repairer.

Keeping this device away from water

Do not let any liquids get into the device or place objects containing liquids (such as
vases) on the device.
Avoid exposing this device to rain, moisture, and splashing water.
Never immerse the device in water or any other liquid.
Do not use this device near water or a source of moisture, such as a bathtub,
washbasin, kitchen sink, swimming pool, or in a damp basement or any other damp
location.

Ventilation warning

This device must be placed in a location or in a position that does not interfere with
its proper ventilation. Always leave a ventilation space of at least 10 cm around the
device. Make sure that vents are not obstructed by objects such as newspapers,
tablecloths, curtains, etc. This device must never be placed in a cabinet without
sufficient ventilation.
Do not insert objects or sharp items into the vents.

Cleaning the device

Unplug your clock radio before cleaning.
Clean the outside of the device with a cloth slightly moistened with water and a mild
detergent.
Do not use solvents such as alcohol, benzene, and thinners as these products may
damage the device's housing.
47
V.1.0

Publicidad

loading