Publicidad
Idiomas disponibles
Idiomas disponibles
Using and disposing of batteries
●
Do not dispose of batteries with household waste. To protect the environment,
dispose of batteries in accordance with current regulations.
●
Never recharge non-rechargeable batteries, do not disassemble the batteries, and do
not throw them into a fire.
●
Do not expose batteries to high temperatures or direct sunlight.
●
Only use the types of batteries specified in this guide.
Electronic equipment
Your Bluetooth* clock radio uses Bluetooth* technology. It transmits and receives
radio frequencies (HF) at around 2.4 GHz. These microwave emissions can disrupt the
operation of many electronic devices. To avoid any accidents, turn off your Bluetooth*
clock radio when you are in the following locations:
●
Places where flammable gases are present
●
Hospitals
●
Trains
●
Planes
●
Petrol stations
●
Places near automatic doors or fire alarms
●
Blasting zones
If you wear a pacemaker, the magnetic field created by the device could affect its
operation. Ask your retailer or doctor for advice.
set-up
Plugging in the device
1.
Make sure that the voltage of your domestic mains supply matches the voltage
shown on the rating plate of the AC adapter and the AC adapter plug is suitable for
the electrical outlet.
2.
Connect the power cord of the AC adapter to the 5V
back of the device.
3.
Plug the AC adapter into an electrical outlet.
4.
Your clock radio turns on and enters the clock mode, displaying the factory default
date and time on its LCD screen.
48
V.1.0
power connector on the
Publicidad
