Publicidad
Idiomas disponibles
Idiomas disponibles
®
®
xFUME
PRO/xFUME
COMPACT
8.3 Cleaning the cable assembly
WARNING
Risk of injury caused by parts swirling around
The use of compressed air for cleaning purposes can cause device parts to come loose and cause serious injuries.
► When cleaning the wire guide with air, wear suitable protective clothing, in particular safety goggles.
Replace any damaged, deformed or worn parts.
1
Lay out the cable assembly straight.
2
At the central plug: Unscrew the nut.
3
9 Disposal
► Do not dispose of the device with household waste.
10 Warranty
This product is an original ABICOR BINZEL product. Alexander
Binzel Schweisstechnik GmbH & Co. KG guarantees correct
manufacture and assumes a factory production and function
warranty for this product upon delivery, which is in line with the
most current technology and the regulations in force. If
ABICOR BINZEL is responsible for a defect that is present,
ABICOR BINZEL is obliged to remedy the defect or deliver a
replacement at its own cost and its own discretion. The warranty
covers manufacturing faults, but not damage resulting from
natural wear and tear, overloading or improper use. The
warranty period is defined in the General Terms and Conditions.
Exceptions in the case of specific products are regulated
separately. Warranty will also be rendered invalid if spare parts
and wear parts are used that are not original ABICOR BINZEL
parts and if the product has been repaired improperly by the
user or a third party.
Wearing parts are excluded in general from the warranty. In
addition, ABICOR BINZEL is not liable for damage caused by
using our products. Questions about warranty and service can
be addressed to the manufacturer or our distributors. For more
information, visit www.binzel-abicor.com.
Clean the wire conduit from both sides with compressed air.
4
4.3 Connecting the cable assembly, Fig. A on page EN-14
► For disposal, observe the local regulations, laws, provisions,
standards and guidelines.
9 Disposal
EN - 17
Publicidad
