US Blaster USB 7015 Manual De Instrucciones página 8

USB 7015
Console mixer
OPERATION
1. It is important to confirm power voltage.
2. Make sure the appliance is switched off before connecting the power cord.
3. Set the controls to the positions stated below to avoid loud blasts. Loud blasts may couse damage to
your speaker system or your ears when you are wearing a headphone.
Master faders L-R, Sub faders 1-2, Effect fader & Each channel faders.
Gain control
Hi,freq,Mid,Low
Auxl-2 & Effect control
Pan control
Set other turn to the left completely
4. Push power switch, the LED will light up.
5. Set Master faders L-R to the position between min & mid.
6.Set the channel faders which you want to use at the position between min & mid. After that, connect
input section with external source.
7. To use external sources, turn the gain control to the right.
© US Blaster Europe BV
All manuals and user guides at all-guides.com
Turn to the left completely
Turn to the center position
Turn to the left completely
Turn to the left completely