Samsung VR30T80 Serie Manual De Instrucciones página 14

Notes and cautions
Installation
NOTE
• If the cleaning area is wooden floors, it is
best to install the Docking Station along the
grain of wooden floors.
• If the power switch is off, the Jet Bot will
not charge even if it is docked on the
Docking Station.
• Always keep the Docking Station on.
- If power is not supplied to the Docking
Station, the Jet Bot cannot find it and
cannot automatically recharge.
- If the Jet Bot is left detached from the
Docking Station, the battery will drain
naturally.
• Do not attach the Boundary Markers as
(-----) shape.
- The Jet Bot may not detect it and cross
the boundary.
Charging
NOTE
• If the battery overheats during charging, it
may take longer to charge.
• When auto charging is not working, do the
following:
- Turn the power switch (at the side the Jet
Bot) off and on again.
- Unplug the Docking Station's power plug
and then plug it back on.
- Unplug the Docking Station, and then
check whether there is any foreign matter
on the charging pins and clean charging
pins of the Jet Bot and the Docking
Station with a dry cloth or rag.
- Check for any obstacles such as reflective
objects, chairs, etc. near the Docking
Station.
14 English
• If the Jet Bot is left detached from the
Docking Station, the battery will drain
naturally.
- Try to keep the Jet Bot being charged on
the Docking Station. (However, turn off
the power switch and leave the Docking
Station unplugged when planning to leave
the house for long periods of time by
going on a business trip or vacation, etc.)
Using
NOTE
• The Jet Bot may get caught on thresholds
of entrance door or veranda, etc. during
cleaning.
- To restart operation, shut off the power
switch, move the Jet Bot to an area where
it can move easily, and then turn on the
power again.
• In a dark area, the Jet Bot may not
recognize an object.
- Before cleaning, remove obstacles on the
floor.
• The Jet Bot cannot completely clean areas
which it cannot enter, such as small space
between the corner, between the sofas or
walls, etc.
- Please use another cleaning tool to clean
them regularly.
• The Jet Bot cannot vacuum clumps of dirt,
so some may remain on the floor after
cleaning.
- Please use another cleaning tool to clean
them regularly.
• After turning the Jet Bot off, wait for a
while and then turn it on for a normal
rebooting.