Publicidad
Idiomas disponibles
Idiomas disponibles
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically design-
ated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
e) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
NOTE The temperature „130 °C" can be replaced
by the temperature „265 °F".
g) Follow all charging instructions and do not
WWW.VONROC.COM
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specified range may damage the battery and
increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
ADDITIONAL SAFETY INSTRUCTION FOR
BATTERY LAWN MOWERS
• Never allow children or people unfamiliar with
these instructions to use the product. Local
regulations may restrict the age of the operator.
When not in use store the product out of reach of
children.
• Never allow children, persons with physical,
sensory or mental limitations or a lack of experi-
ence and/or knowledge and/or people unfamiliar
with these instructions to use the product. Local
regulations may re-strict the age of the operator.
• Children should be supervised to ensure that
they do not play with the product.
• Never work while people, especially children, or
pets are nearby.
• The user is responsible for accidents or hazards
occurring to other people or their property.
• Do not wear open rubber shoes or sandals when
using the product. Al-ways wear sturdy shoes
and long trousers. Do not use barefoot.
• Thoroughly inspect the area where the machine
is to be used and re-move all stones, sticks,
wires, bones and other foreign objects.
• Before using, always visually inspect to see that
the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance.
• Mow only in daylight or in good artificial light.
• Avoid mowing in bad weather conditions espe-
cially when there is a risk of lightning.
• Avoid operating the machine in wet grass, where
feasible.
• Walk, never run.
• Never operate the machine with defective guards
or shields, or without safety devices, for example
EN
11
Publicidad
