Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
I. Introduction
You have purchased a very sophisticated component speaker system manufactured by
® ®
Ultimate
Sound. Founded in 1975, Ultimate
application, speakers for marine environments, enclosed speaker systems, amplifiers,
accessories and other products. Our tradition of leadership and innovation in the audio industry
continues with innovative products like Platinum Format loudspeakers with HEATT™ ™
Technology.
We recommend you have your new Platinum Format loudspeakers installed by a
professional. Professional installation shops have the equipment to do the job correctly, and
the experience to recommend the best mounting locations in your vehicle.
Please use your new Platinum Format loudspeakers responsibly. Very loud music can cause
permanent hearing loss.
PLATINUM FORMAT FEATURES:
•
HEATT™ ™ Technology means our Platinum Format drivers handle more power with
less distortion. A layer of nickel, bonded to an injection molded cone, dissipates heat
from the voice coil. The nickel layer also increases the stiffness of the cone for less
harmonic distortion at high power.
•
The Butyl Rubber Surround has superior damping characteristics and will last longer
than foam surrounds
•
Titanium Dome Swivel Tweeters with Neodymium Magnets provide smooth response
beyond 25kHz for crystal clear high frequencies. Swivel tweeters can be aimed precisely
for best stereo imaging. Flush, surface, or angle mount for complete flexibility in
planning your installation.
•
Matched 12dB/Octave Crossovers with +2dB/-2dB tweeter level adjustment for precise
system tuning.
•
A Black Chrome Plated Frame provides a distinctive appearance in keeping with the
"Platinum" designation.
•
A Rubber Magnet Cover protects the magnet from chipping or breaking.
II. Package Contents
•
1 pair of Platinum Format component mid-woofers
•
1 pair of speaker grilles and mounting rings
•
Grille mounting adhesive
•
Mounting hardware(nuts, screws and screw clips)
•
1pair of titanium dome swivel tweeters
•
Tweeter mounting hardware(flush, surface and angle)
•
20' of #18AWG speaker wire
•
1 pair of 12dB/Octave crossovers
•
Instruction manual, warranty card and cut-out template
III.
Installation- Crossovers
1.
Choose mounting locations for your Platinum Format crossovers. Make sure the the
crossovers will not obstruct the mechanical function of any device or system in the
vehicle. Be sure the mounting location and the drilling of screw holes for mounting will
not present a hazard to any wires, control cables, fuel lines, fuel tanks, hydraulic lines, or
other vehicle systems or components.
2.
Press the indentation at the end opposite the connecting terminals and lift off the
crossover cover. If you wish to mount the crossover to a flat surface, use the crossover as
a template to mark where to drill the mounting holes. Use a 1/8"(3mm) bit, drill the
holes and use the supplied screws to mount the crossover.
3.
You may want to mount the crossovers in an accessible location so you can easily change
the tweeter output level by moving the jumper to +2dB, -2dB or 0dB.
2
® ®
Sound makes speakers for every car audio
® ®
Ultimate
Publicidad
