Technical Data; Safety Instructions - auna C500 Manual De Instrucciones

EN
Item number
Outputs
Max. Output power
High pass
Low pass
Signal-to-noise ratio
Frequency response
Input sensitivity
Impedance
Load impedance
Attenuation factor
Bass boost
Power supply
Dimensions (mm)
22

TECHNICAL DATA

10032117
2 channels
1000 W
200 x 250 x 52

SAFETY INSTRUCTIONS

Power supply
• Do not connect the +12 V power cable until all other cables are
connected.
• Make sure that the unit's earth wire is securely connected to a metal
point on the vehicle.
• If you are using the car radio without the remote output to the amplifier,
connect the remote input terminal (REM OTE) to the power supply
accessory.
• Use the power cable with an attached fuse (40 A).
• Ensure that the cables to the +12 connection and earth connection have
a larger cross-section than 5 mm2.
10032118
4 channels
2000 W
50 Hz - 500 Hz
50 Hz - 250 Hz
90 dB
10 Hz - 30 kHz
120 mV - 1.0 V
Signal-to-noise ratio
2 - 8 Ω
> 120
(50 Hz) 0/+6/+12 dB
10.5 - 15 V
200 x 280 x 52
100321119
6 channels
3000 W
350 x 250 x 52