Finish Cooking; Locking The Controls; Using The Double Zone Function - DRIJA ALEMANIA 90 Professionale Manual De Instrucciones

Topes vitrocerámica
Ocultar thumbs Ver también para ALEMANIA 90 Professionale:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.3.2 Finish cooking

Touching the heating zone selection control that you wish to
switch off.
Turn the cooking zone off by touching the slider to " l ".
Make sure the display shows "0"
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.

3.3.3 Locking the Controls

You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
When the controls are locked, all the controls except the ON/OFF control are disabled.
Touch the lock
control
When the hob is in the lock mode, all the controls are disable except the ON/OFF
the ceramic hob off with the ON/OFF
next operation.

3.3.4 Using the Double zone function

• The function only work in 3# and 4# cooking zone
• The dual cooking zone has two cooking areas that you can use a central section and an outer section. You
To lock the controls
To unlock the controls
Make sure the ceramic hob is turned on
Touch and hold the lock control
control in an emergency, but you shall unlock the hob first in the
EN-10
The timer indicator will show " Lo "
for a while.
,
you can always turn

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido