Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing to use
the outdoor sensor
Remove the battery compartment cover
from the back of the outdoor sensor.
Remove the battery safety strip.
The outdoor sensor is now ready for use
and the control LED
Close the battery compartment cover.
If this does not work, carry out a restart
of the temperature station if necessary. To
do this, press and keep pressed the
Z
Z
/ REGISTER button
outdoor sensor only).
Preparing the temperature
station for use
Open the battery compartment
back of the temperature station.
Remove the battery safety strip.
Close the battery compartment cover.
Connecting the temperature station
with the outdoor sensor and the DCF
radio signal:
After removal of the battery safety strip, the
temperature station attempts to establish a
connection with the outdoor sensor. This pro-
cess can take a few minutes. The
nal symbol
station has successfully connected to the out-
door sensor, the
stops flashing and the temperature is shown in
the LC display.
86 GB/MT
flashes. Once the temperature
10
Radio signal symbol
illuminates briefly.
29
(restart the
21
Radio sig-
on the
25
10
Publicidad
