Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS (Continued)
5. Using a level, mark down from the center of the Z-bar (DD)
22-3/4 in. for horizontal mirror orientation or 28-7/8 for the
vertical mirror orientation. Drill a 7/32 in. hole at this
location and insert a drywall anchor (BB).
Hardware Used
BB
Drywall anchor
6. Drive the locking screw (EE) into the lower drywall
anchor (BB), leaving 1/2 in. exposed.
7. Connect the white wire from the mirror (A) to the white wire
from the electrical box. Connect the black wire from the
mirror (A) to the black wire from the electrical box. Connect
the green ground wire from the mirror (A) to the ground wire
from the electrical box. Cover and secure each wire connec-
tion with a wire connector (CC).
Hardware Used
CC
Wire connector
8. Carefully attach the mirror (A) to the z-bar (DD), centering it
and ensuring it is secure. The locking screw (EE) will align
with the keyhole bracket on the back of mirror. Once the
locking screw (EE) is aligned through the keyhole slot,
move the mirror slightly to either side to lock it in place.
Once the mirror (A) is securely in place on the Z-bar
(DD), turn on the power at the circuit breaker or reinsert
the fuse.
Hardware Used
Locking
EE
screw
DD
Z-bar
Homewerks.com
5
DD
x 1
Horizontal mount
6
7
x 3
8
x 1
x 1
5
DD
22-3/4"
Vertical mount
BB
EE
1/2"
DD
EE
28-7/8"
A
Publicidad
