Vibrations; Safe Working - ATIKA LSH 3000 Manual Original

Vibrations

Hand arm vibration a = 3.0 m/s²
vhw
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of the vibration
exposure.
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
instructions or indicated by the manufacturer.
This may be caused by the following factors to be minded
before and during the use:
− Proper use of the machine
Proper condition of the machine for use
−
− Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin
on your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be considerably
reduced over the entire work time. Minimise the risk caused
by vibrations. Maintain this machine according to the
instructions in the manual. If you intend to use this machine
frequently, contact your local authorised dealer and purchase
anti-vibration accessories if required. Avoid the use of this
machine at temperatures under 10°C. Create a work
schedule in order to minimise vibration exposure.

Safe working

When improperly handled a garden vac may be
dangerous. If electrical tools are used, the fundamental
safety precautions must be met to preclude the risks of
fire, electric shock and injuries to persons.
Before commissioning this product, read and keep to the
following advice. Also observe the preventive regulations
of your professional association and the safety
provisions applicable in the respective country, in order
to protect yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see
"Normal intended use" and "Working with the vacuum
cleaner").
Ensure that you have stand in a secure standing position
and maintain your balance at all times. Do not bend
forwards.
When working on slopes always make sure to have a safe
standing position.
Only operate the machine in walking speed, do not run
with it.
All manuals and user guides at all-guides.com
Be observant. Attend to what you do. Start working with
rationality. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments. One
moment of carelessness when using the device can result
in serious injuries.
Wear suitable work clothes:
− do not wear loose-fitting clothes or jewellery; they can
catch in moving parts.
− gloves and nonskid footwear
− trousers to protect the legs
− Keep long hair away from the intake opening.
Otherwise, it could be drawn into the intake opening.
Wear a hairnet if required.
Wear protective clothing:
− safety goggles
− ear protection (Sound intensity level at workplace can
exceed 85 dB (A)
− It is recommended to wear a face guard to prevent
irritation due to dust.
Keep your workplace in an orderly condition! Untidiness
can result in accidents.
Be careful when stepping back! Risk of stumbling!
If you come across to foreign objects, please power off the
device and remove those foreign objects. However before
you restart the device, check it for possible damages and
have it repaired if necessary.
Take into consideration environmental influences:
− Do not use the device in moist or wet ambience.
− Do not expose the device to rain.
− Do only work with sufficient visibility conditions.
Provide for good illumination.
Keep bystanders and animals away from your working
area.
Do not allow other persons, especially children, to touch
the tool or cable.
Switch off the machine if persons, in particular children or
pets, are close to you or if you change your working area.
Within his area of work the operator is responsible for third
parties.
Children and youngsters less than 16 years of age and
people who have not read the original instructions must
not operate the machine.
Keep children away form machine.
Never operate the machine if other persons are in the
immediate vicinity.
The user is responsible for accidents with other people or
their property.
Never leave the saw unattended.
Do not overload the machine! You work better and safer in
the given performance range.
Only operate the machine with complete and correctly
attached safety equipment and do not alter anything on the
machine that could impair the safety.
Faulty or damaged parts in the device must be replaced
immediately.
Never leave the machine powered when tipping it over on
its side. The machine is designed for operating in upright
posture.
Do not spray machine with water
(this is hazardous due to live components).
12