Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
WARNING: DANGER OF PERSONAL INJURY
THE INSTALLATION MUST BE PERFORMED BY AUTHORIZED
PROFESSIONAL ONLY AND AN ALL POLES DISCONNECTION
DEVICE MUST BE INCORPORATED IN THE FIXED WIRING IN
ACCORDANCE WITH THE NATIONAL WIRING RULES.
Before installing the appliance for the first time, remove all packing and
•
foreign materials from the appliance and dispose packaging material safely
according to local regulation. Any material of this sort left in the appliance
may melt and/or burn when the appliance are used.
•
Check for visible damage of the appliance and the power cord. Do not use the
appliance any more if you find the power cord or some parts of this product
are damaged.
Check the supply voltage from the fixed wiring matches the value indicated
•
on the appliance. Do not connect the appliance to the fixed wiring when the
voltage does not match the rated value indicated on the appliance
•
Place the appliance in a location with superior ventilation system and far
away from tinder and explosive object, and place the appliance on a smooth
horizontal and stable surface, and Keep good heat dissipation — When
operating the appliance, keep at least 50mm space on all side of the appliance
to allow adequate air circulation.
Connect the appliance to the fixed wiring in accordance with the national
•
wiring rules and connection diagram in the appliance .
OPERATING INSTRUCTIONS
Before use, please check whether the voltage of power supply is in conformity with
that in the value indicated on the marking plate.
Operating steps:
1.
Switching on the appliance by connecting the disconnection device in the
fixed wiring, and then the indication light is on green to indicate the appliance
is in STAND BY MODE. Adjust the working temperature to the required one,
now working light is on yellow, the heating plate is working. After tested, the
user can re-adjust the thermostat knob, select the required temperature for
working again.
2.
When the temperature reaches the setting one, the yellow light will turn
off, then it will turn into the thermostat state, the user can start to work.
When the temperature comes down, the thermostat will start working again
automatically.This process is cycling repeatedly, guarantee the temperature is
on the set up scope.
3.
The grill with two thermostats, the left one is controlling the left heating
plate's temperature and the right one is controlling the right heating plate,
EN
13
Publicidad
