Start The Machine; Stop The Machine; Operate The Machine; Maintenance - GreenWorks SSF405 Manual Del Operador

EN
10.2

START THE MACHINE

1. Push and hold the lock-out button (2).
2. Pull the trigger (3) to start the machine.
3. Release the lock-out button (2).
Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.
If it is possible, clear the snow in the direction of the wind.
10.3

STOP THE MACHINE

1. Release the trigger (3) to stop the machine.
10.4

OPERATE THE MACHINE

1. Start the machine.
2. Push the machine forward until it rides on the scraper
(14).
2 3
WARNING
NOTE
English
The forward speed is dependent on the depth and weight of
the snow.
11

MAINTENANCE

Remove the battery pack from the machine before
maintenance.
Wear correct clothing, gloves and safety glasses before
maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
11.1

GENERAL MAINTENANCE

• Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a brush.
10
NOTE
WARNING
WARNING
CAUTION
CAUTION
CAUTION