Publicidad
SyMboLS
�
Battery
�
Double insulated
�
Direct Current
�
Alternating Current
Conforms to relevant Australian
�
standards.
Do not dispose of this product as
�
unsorted municipal waste.
Application around and removal
�
from hazardous live conductors
is permitted
SAfETy INfoRMATIoN
•
The ACDC-100 Series Digital Clampmeters conform to en61010-1:2001; en61010- 2-
032:2002; CAT iii 600 V, class 2 and pollution deg.2
•
This instrument is en61010-1 certified for installation Category iii (600V). it is
recommended for use in distribution level and fixed installations, as well as lesser
installations, and not for primary supply lines, overhead lines and cable systems.
•
Do not exceed the maximum overload limits per function (see specifications) nor the limits
marked on the instrument itself. never apply more than 600 Vdc/600 V ac rms between
the test lead and earth ground.
�
Warnings and Precautions
•
Before and after hazardous voltage measurements, test the voltage function on a known
source such as line voltage to determine proper meter functioning.
•
Disconnect the test leads from the test points before changing meter functions.
•
inspect the Clampmeter, test leads and accessories before every use. Do not use any
damaged part.
•
never ground yourself when taking measurements. Do not touch exposed circuit elements
or test probe tips.
•
Do not operate the instrument in an explosive atmosphere.
•
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
•
The meter is intended only for indoor use. To avoid electrical shock hazard, observe the
proper safety precautions when working with voltages above 60 VDC or 30 VAC rms.
These voltage levels pose a potential shock hazard to the user.
All manuals and user guides at all-guides.com
5
�
Refer to the manual
�
Dangerous Voltage
�
earth ground
�
Audible tone
�
Complies with eU directives
Underwriters laboratories.
�
[note: Canadian and US.]
Publicidad
Solución de problemas
