Installation Instructions; Checking The Installation Enclosure; Removing The Packaging - Thermador T18 Serie Instrucciones De Instalación

Installation instructions

The following installation instructions describe th e
installation steps for various appliance types:

Refrigerator units

Freezer units

Freezer units with ice maker

Freezer units with ice-water dispenser

Wine storage units
Therefore the diagrams may be a general representat
of your appliance.
Particular reference is made to special installatio
for individual appliance types.
1.

Checking the installation enclosure

,
All manuals and user guides at all-guides.com
ion
n steps
,

The appliance may tip over while it is being
unpacked or if the doors are opened.

The appliance is very heavy.
Note:
Check appliance for damage in transit.
Do not install the appliance if it is visibly damag
If in doubt, contact your dealer.
To avoid floor damage:
1. Remove the packaging cart
damage the surface of appliance.
2. Place packaging cardboard or plywood under the
appliance.
3. Remove accessories from the outside
of the appliance.
Save adhesive tape which was used to attach
the supplied accessories to the appliance.
It can be used subsequently for attaching an edge
protection to the installation enclosure walls
(see section on " A / 3. Attaching an edge
protection").
4. Remove transportation protection devices (a) and
appliance off the pallet –
5. Carefully open the appliance – risk of tipping ove
and remove accessories and installation materials
from inside the appliance. Close the door again.
Note:
Do not remove transportation safety devices which
protect the shelves and storage compartments
inside the appliance until the installation is complete,
otherwise the parts may be damaged.
ed.
on and be careful not to
lift
appliance is very heavy!
r –
11