Connection To Output Dvd; Connecting The Unit To A Tv Using The Audio/Video Output Jacks; Connecting The Unit To A Tv Using The S-Video Output Jack - memorex MVD4544 Guia Del Usuario

CONNECTING THE UNIT TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS (FOR DVD AND VCR)
CONNECTING THE UNIT TO A TV USING THE S-VIDEO OUTPUT JACK (FOR DVD ONLY)
NOTES:
• If your TV has a Component input, connect the player with the Component cable as described on the following page for
best results.
• Set the TV's TV/VIDEO button or switch to the VIDEO setting.
• When connecting, refer to the owner's manual of the TV, as well as this manual.
• When connecting, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
• Set the VIDEO OUT Option (on the GENERAL Menu Page) to S-VIDEO if using the S-Video Out jack.
• If using a TV with a blue screen option, turn the option off on the TV for best results.
• The S-VIDEO output jack connection can only be used for DVD playback, not for VCR mode.
All manuals and user guides at all-guides.com

CONNECTION TO OUTPUT DVD

10
If your TV has separate AUDIO IN
jacks for Composite Video and S-
Video Inputs, connect to these jacks.
If your TV has one set of AUDIO IN
jacks for Composite Video and S-
Video Inputs, connect to these jacks.