Operation By Children And Persons With Limitations; Safety Measures In Normal Operation; Emc Device Classifications; Emc Measures - Fronius Acctiva Smart 25 A Manual De Instrucciones

Operation by This device can be used by children aged 8 years and over, as well as individuals
children and per-
with reduced physical, sensory or mental capabilities, or a lack of experience and
sons with limita- knowledge, if such persons are under supervision or have received instruction
tions concerning use of the device in a safe way and if they understand the risks invol-
ved. Children must not play with the device. Children must not perform cleaning
or user maintenance unless supervised.
Safety measures Chargers with a ground conductor must only be operated on a mains supply with
in normal opera-
a ground conductor and a socket with a ground conductor contact. If the charger
tion is operated on a mains supply without a ground conductor or in a socket without
a ground conductor contact, this will be deemed gross negligence. The manufac-
turer shall not be held liable for any damage arising from such usage.
Only operate the charger in accordance with the degree of protection shown on
the rating plate.
Under no circumstances operate the charger if there is any evidence of damage.
Arrange for the mains cable to be checked regularly by a qualified electrician to
ensure the ground conductor is functioning properly.
Any safety devices and parts that are not functioning properly or are in imperfect
condition must be repaired by a qualified technician before switching on the
charger.
Never bypass or disable protection devices.
After installation, an accessible mains plug is required.
EMC Device
Devices in emission class A:
Classifications -
-
Devices in emission class B:
-
EMC device classification as per the rating plate or technical data.

EMC measures

In certain cases, even though a device complies with the standard limit values for
emissions, it may affect the application area for which it was designed (e.g. when
there is sensitive equipment at the same location, or if the site where the device
is installed is close to either radio or television receivers).
If this is the case, then the operating company is obliged to take appropriate ac-
tion to rectify the situation.

Maintenance

Before switching on, always check the mains plug and cable as well as charger
leads and charging terminals for any signs of damage.
If the surface of the device housing is dirty, clean with a soft cloth and solvent-
free cleaning agent only.
50
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas
Satisfy the emissions criteria for residential and industrial areas. This is also
true for residential areas in which the energy is supplied from the public low-
voltage mains.