Preparation For Operation; Working With The Unit - MSW Motor Technics MSW-WDH-1500N Manual De Instrucciones

Idiomas disponibles

8. Roller supports (wheels)

9. Column locking pin

10. Swivel wheels (2x with brake + 2x without brake)

3.2.

Preparation for operation

POSITIONING OF THE UNIT

The ambient temperature must not exceed 45°C and ambient humidity should not

exceed 85%. Keep the unit away from any hot surfaces. Always operate the unit on

a level, stable, clean, fireproof and dry surface and out of the reach of children and

persons of impaired mental, sensory and intellectual functions.

3.3.

3.3.1. Loading the wheel onto the unit

NOTE: The vehicle should be on a level, flat surface. The axle from which the

wheel is to be removed should be raised and rest securely on supports/lifts

high enough off the surface to allow the wheel to be driven under.

Up - raise the wheel/reduce distance between jacks

Down - lowering the wheel/increasing the distance between

jacks

NOTE: both sockets have the same function and differ only in

the gear ratio, i.e. the number of revolutions in relation to the

stroke.

Tabla de Contenido